A C6, microSD, a Type-C labelled high-speed USB. The camera connector looks wired for a camera module (its own 2.8 V and 1.8 V supplies), not in Pi order.
What ESP-KVM needs from a board
- ✓ 32 MB of PSRAM. It has the 32 MB of PSRAM the video needs.
- ? A camera connector the capture board fits. Not known whether the HDMI capture board's camera ribbon fits its camera connector. Connector: likely a camera-module pinout.
- ? High-speed USB towards the target. Not known whether its high-speed USB can face the target as a device.
- ✓ A network. It has a network: Ethernet, or Wi-Fi through a co-processor.
Chip revision: 1.x.
Read from the maker’s documents, checked 2026-10, not from a board in hand.
Have one?
One request is enough: I add a board as soon as someone who has it can try a test build.
- Open a board request in Discussions. The form asks for the board's shop page, its schematic if there is a link, the chip marking and the capture board you have.
- I make a test image from the schematic and post it in the thread.
- You flash it on the flasher with Install another version from a file, and tell me what works. The flasher's Back up the flash keeps the board's old firmware.
- Once the picture, the keyboard and the network work, the board goes into the catalog with its own image and updates.
ESP-KVM is free, open-source firmware that turns an ESP32-P4 board into an IP-KVM: another computer’s screen, keyboard and mouse in your browser, from the BIOS up. The boards it runs on →