High-speed USB on edge pads and Wi-Fi with the C6 add-on. But the camera is on a 16-pin board-to-board connector, so a Raspberry Pi ribbon does not fit without an adapter.
What ESP-KVM needs from a board
- ✓ 32 MB of PSRAM. It has the 32 MB of PSRAM the video needs.
- ✗ A camera connector the capture board fits. The HDMI capture board's camera ribbon does not fit, or there is no free camera connector. Connector: 16-pin board-to-board, needs an adapter.
- ✓ High-speed USB towards the target. Its high-speed USB comes out where it can face the target as a device.
- ✓ A network. It has a network: Ethernet, or Wi-Fi through a co-processor.
Chip revision: 1.x.
Read from the maker’s documents, checked 2026-11, not from a board in hand.
ESP-KVM is free, open-source firmware that turns an ESP32-P4 board into an IP-KVM: another computer’s screen, keyboard and mouse in your browser, from the BIOS up. The boards it runs on →