M5Stack Unit PoE-P4X

ESP-KVM is free, open-source firmware that turns the M5Stack Unit PoE-P4X into an IP-KVM: the screen, keyboard and mouse of another computer in your browser, from the BIOS up. Add an HDMI capture board, flash it from the browser, and it runs with no Linux, no app and no cloud. What it does → Try the demo →

An image for a Unit PoE-P4 with a rev 3.x chip. M5Stack does not list one yet.

Status	Built from the schematic, not run on one yet
Family	All M5Stack parts
Chip	ESP32-P4, rev 3.x
Memory	32 MB PSRAM, 16 MB flash
Network	100M Ethernet, 802.3at PoE
Capture connector	24-pin flat cable to the Add-on Display In
microSD	yes, on the capture module the board needs anyway

Have one? Nobody has run ESP-KVM on this yet. If you try it, tell me how it went, whether it worked or not: one report moves it to tested or gets the bug fixed. Post your result →

M5Stack sells the Unit PoE-P4 with a rev 1.x chip (ESP32-P4NRW32). This image is for the same board with a rev 3.x chip, should one appear. M5Stack does not list such a unit today, so the name and the chip are expected, not announced.

Nobody has run it. One part is known to be unchecked: on rev 3.x the picture from the LT6911D bridge takes a different path, and its byte order has not been tried, so the colours may come out wrong.

If your Unit PoE-P4's boot log says chip revision: v3.x, this is the image for it - and please tell me how it went.

M5Stack Unit PoE-P4X

Capture board