A second printed case, and a YouTube channel

Someone asked whether there is a case for the ESP32-P4-ETH and the C790 together. There was not. I said I would get to it and then did not, because the firmware kept winning the evening.

The second printed case: a black box vented along one side, with the ports coming out of the ends.

Two people made one instead. Colin Hickey published a box on Printables that holds both boards and the cable to the target, and now Fabrion365 has adapted his ESP32-P4-ETH design into a second one on MakerWorld, after someone went and asked him. Dave Davenport has a design for the NANO in the same thread. Two boards, three enclosures, none of them mine, so the hardware list links all of them.

There is also a YouTube channel now. The two short clips this project has produced were sitting on a personal account, scattered through blog posts. Both are on the channel: the round display cycling its pages, and a boot menu being selected with the mouse as text. Silent, unedited, a minute or less each.