← All boards

ESP-KVM is free, open-source firmware that turns the Guition ESP32-P4-M3-Dev into an IP-KVM: the screen, keyboard and mouse of another computer in your browser, from the BIOS up. Add an HDMI capture board, flash it from the browser, and it runs with no Linux, no app and no cloud. What it does → Try the demo →

Guition ESP32-P4-M3-Dev
The device - community-tested

Guition ESP32-P4-M3-Dev

A display board that also carries Ethernet and an ESP32-C6. The capture ribbon goes into J3.

StatusRun on hardware
ChipESP32-P4, rev 1.x or rev 3.x (an image for each)
Memory32 MB PSRAM, 16 MB flash
Network100M Ethernet, Wi-Fi 6 (ESP32-C6)
To the targetUSB-C, the OTG-HS one
Capturecamera connector J3

Install from the browser

A 4.3" MIPI-DSI touch display board; the KVM does not use the display. A contributor confirmed capture, USB and Ethernet on pre-3.0 silicon.

Wiring

  • The target goes on the OTG-HS USB-C port, not the other one.
  • The capture board's ribbon goes into J3, not J2 (#61). With nothing in J3, the only chip the firmware finds on the capture bus is the board's own audio codec, and it says so.

Capture boards

Geekworm C790 TC358743 Waveshare HDMI to CSI Adapter TC358743